EndoLab - Implant Testing Services Implant Testing

Wirbelsäulenimplantate
 

Wirbelsäulenimplantate - Komponenten - ASTM F2193Wirbelsäulenimplantate - Komponenten - ASTM F2193 Wirbelsäulenimplantate - Verbindungs- und Teilkonstrukte - ASTM F1798Wirbelsäulenimplantate - Verbindungs- und Teilkonstrukte - ASTM F1798 Korpektomie Modell - ASTM F1717Korpektomie Modell - ASTM F1717 Fusionsimplantate - ASTM F2077Fusionsimplantate - ASTM F2077 Verschleißversuch - ISO 18192-1Verschleißversuch - ISO 18192-1 Einsinkverhalten - ASTM F2267Einsinkverhalten - ASTM F2267 Nucleusimplantate - ISO 18192-2Nucleusimplantate - ISO 18192-2 Expulsion Test - PI-52Expulsion Test - PI-52 Korpektomie Modell mit anteriorer Unterstützung - ISO 12189Korpektomie Modell mit anteriorer Unterstützung - ISO 12189 Extra diskale bewegungserhaltenden Wirbelsäulenimplantate - ASTM F2624Extra diskale bewegungserhaltenden Wirbelsäulenimplantate - ASTM F2624 Prüfung von Facettengelenkimplantaten - ASTM F2694/F2790Prüfung von Facettengelenkimplantaten - ASTM F2694/F2790 Okzipital-zervikale und Okzipital-zervikale-thorakale Modelle - ASTM F2706Okzipital-zervikale und Okzipital-zervikale-thorakale Modelle - ASTM F2706 Dornfortsatzplatten - PI-76Dornfortsatzplatten - PI-76 Prüfung von Nucleusimplantaten nach - ASTM F2789Prüfung von Nucleusimplantaten nach - ASTM F2789 Impingement Test für lumbale ProthesenImpingement Test für lumbale Prothesen Spezielle Anforderungen an Gelenkimplantate - ISO 21534Spezielle Anforderungen an Gelenkimplantate - ISO 21534 Impingement wear testing of total disc prostheses - ASTM F3295Impingement wear testing of total disc prostheses - ASTM F3295 Bandscheibenimplantate - ASTM F2346Bandscheibenimplantate - ASTM F2346 Präklinische Testung von Wirbelkörperimplantaten (cage) - ISO 23089-2Präklinische Testung von Wirbelkörperimplantaten (cage) - ISO 23089-2

Dornfortsatzplatten - PI-76

Aktuelle Prüfverfahren  



PI-76: (WK45142) Standard Practice for Mechanical Characterization of Spinous Process Plates

This standard is used for testing of spinous process plates. SPP consists of parallel plates that are clamped around adjacent spinous processes to stabilize the motion segment for fusion. This procedure describes static and dynamic tests by specifying load types and specific methods of applying these loads. The following tests to evaluate and characterize them can be carried out at EndoLab®: Static and dynamic axial compression, static and dynamic torsion, static and dynamic plate dissociation and static pull-out from standard foam.  


Implant Testing - Dornfortsatzplatten - PI-76