EndoLab - Implant Testing Services Implant Testing

Material testing
 

Shear strength of coatings - ASTM F1044 and F1160Shear strength of coatings - ASTM F1044 and F1160 Tensile strength of coatings - ASTM F1147 and ISO 13779-4Tensile strength of coatings - ASTM F1147 and ISO 13779-4 Stereological evaluation of coatings - ASTM F1854Stereological evaluation of coatings - ASTM F1854 Abrasion Resistance of Coatings - ASTM F1978Abrasion Resistance of Coatings - ASTM F1978 Dissolution test of calcium phosphate - ASTM F1926Dissolution test of calcium phosphate - ASTM F1926 General requirements plasma-sprayed unalloyed titanium coatings - ISO 13179General requirements plasma-sprayed unalloyed titanium coatings - ISO 13179 General requirements thermally-sprayed HA coatings - ISO 13779-2General requirements thermally-sprayed HA coatings - ISO 13779-2 General requirements bone substitutes - ISO 13175-3General requirements bone substitutes - ISO 13175-3 Calcium Phosphate Coatings for Implantable Materials - ASTM F1609Calcium Phosphate Coatings for Implantable Materials - ASTM F1609
Grain size analysis - ASTM E112 and ISO 643Grain size analysis - ASTM E112 and ISO 643 Titanium alloy microstructure - ISO 20160Titanium alloy microstructure - ISO 20160 Material properties of Ti6Al4V (extra low interstitial) - ASTM F136Material properties of Ti6Al4V (extra low interstitial) - ASTM F136 Steel nonmetallic inclusions - ISO 4967Steel nonmetallic inclusions - ISO 4967 Tension testing of nickel-titanium - ASTM F2516Tension testing of nickel-titanium - ASTM F2516 Compression test of metallic cellular materials - DIN 50134Compression test of metallic cellular materials - DIN 50134 Tensile properties of metallic materials - ISO 6892-1Tensile properties of metallic materials - ISO 6892-1 Titanium alloy specification - ISO 5832-3Titanium alloy specification - ISO 5832-3 CoCr casting alloy specification - ISO 5832-4CoCr casting alloy specification - ISO 5832-4 ISO 7438 Bend testISO 7438 Bend test Fluorescent Penetrant Inspection of Metallic Surgical Implants - ASTM F601Fluorescent Penetrant Inspection of Metallic Surgical Implants - ASTM F601 Corrosion Fatigue Testing of Metallic Implant Materials - ASTM F1801Corrosion Fatigue Testing of Metallic Implant Materials - ASTM F1801 Assessment of Corrosion Behaviour of Metallic Implantable Materials - ISO 16429Assessment of Corrosion Behaviour of Metallic Implantable Materials - ISO 16429
Bone cement fatigue - ASTM F2118 / ISO 16402Bone cement fatigue - ASTM F2118 / ISO 16402 Bone cement specification - ASTM F451 and ISO 5833Bone cement specification - ASTM F451 and ISO 5833 PMMA molding resin - ASTM F3087PMMA molding resin - ASTM F3087
Hardness of ceramics - DIN EN 843-4 / ISO 14705Hardness of ceramics - DIN EN 843-4 / ISO 14705 Mechanical properties of monolithic ceramics - DIN EN 843-2Mechanical properties of monolithic ceramics - DIN EN 843-2 Wear properties of ceramics - PI-60 (ISO 6474)Wear properties of ceramics - PI-60 (ISO 6474) Ceramic specification - ISO 13356 and ISO 6474-1/2Ceramic specification - ISO 13356 and ISO 6474-1/2
Metallic Skeletal Pins and Wires - Requirements - ISO 5838-1Metallic Skeletal Pins and Wires - Requirements - ISO 5838-1 Dimensions of Steinmann Skeletal Pins - ISO 5838-2Dimensions of Steinmann Skeletal Pins - ISO 5838-2 Characteristics of Kirschner Skeletal Wires - ISO 5838-3Characteristics of Kirschner Skeletal Wires - ISO 5838-3 Fixation Pins and Wires - Specifications - ASTM F366Fixation Pins and Wires - Specifications - ASTM F366
Corrosion Test of Small Implants - ASTM F2129Corrosion Test of Small Implants - ASTM F2129 Fretting Corrosion Testing of Modular Implants – Femoral Stem-Head Interface - ASTM F1875Fretting Corrosion Testing of Modular Implants – Femoral Stem-Head Interface - ASTM F1875 Fretting Corrosion of Osteosynthesis Plates and Screws - ASTM F897Fretting Corrosion of Osteosynthesis Plates and Screws - ASTM F897 Galvanic Corrosion - ASTM F3044Galvanic Corrosion - ASTM F3044 Corrosion of Surgical Instruments - ASTM F1089Corrosion of Surgical Instruments - ASTM F1089 Accelerated Aging of UHMWPE - ASTM F2003 / ISO 5834-3Accelerated Aging of UHMWPE - ASTM F2003 / ISO 5834-3 Surgical and Dental Hand Instruments – Determination of Resistance against Autoclaving, ...Surgical and Dental Hand Instruments – Determination of Resistance against Autoclaving, Corrosion and Thermal Exposure - ISO 13402 Corrosion Fatigue Testing of Metallic Implant Materials - ASTM F1801Corrosion Fatigue Testing of Metallic Implant Materials - ASTM F1801 Calculation of Corrosion Rates - ASTM G102Calculation of Corrosion Rates - ASTM G102 Assessment of Corrosion Behaviour of Metallic Implantable Materials - ISO 16429Assessment of Corrosion Behaviour of Metallic Implantable Materials - ISO 16429
Tensile Properties of Plastics - ASTM D638Tensile Properties of Plastics - ASTM D638 Small punch test - ASTM F2183Small punch test - ASTM F2183 Polyethylene specification - ASTM F648Polyethylene specification - ASTM F648 Rigid Polyurethane Foam according to - ASTM F1839Rigid Polyurethane Foam according to - ASTM F1839 Conditioning of plastics - ASTM D618Conditioning of plastics - ASTM D618 Density Test of Plastics - ASTM D792Density Test of Plastics - ASTM D792 Plastic film tensile test - ASTM D882Plastic film tensile test - ASTM D882 Shear Strength of Plastics - ASTM D732Shear Strength of Plastics - ASTM D732
Scaffold permeability - ASTM F2952Scaffold permeability - ASTM F2952
Surface Texture Assessment of Non-Porous Biomaterials - ASTM F2791Surface Texture Assessment of Non-Porous Biomaterials - ASTM F2791
F1980 Accelerated Aging of Sterile Barrier SystemsF1980 Accelerated Aging of Sterile Barrier Systems ISO 11607-1 Packaging materialsISO 11607-1 Packaging materials Seal Strength - ASTM F88/F88MSeal Strength - ASTM F88/F88M Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible ...Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids - ASTM F2824 Thickness of Foil, Thin Sheet, and Film by Mass Measurement - ASTM E252Thickness of Foil, Thin Sheet, and Film by Mass Measurement - ASTM E252

Surface Texture Assessment of Non-Porous Biomaterials - ASTM F2791

Normative References  



ASTM F2791: Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions

ISO 7206-2: Implants for surgery - Partial and total hip joint prostheses: Articulating surfaces made of metallic, ceramic and plastic materials  


The test method describes some of the most common methods for measuring the topographical features, for example the roughness of biomaterial surfaces.
Using a stylus instrument the surface texture of metals (including metal coatings), plastics (including coatings) and ceramics can be analyzed at EndoLab.  

Implant Testing - Surface Texture Assessment of Non-Porous Biomaterials - ASTM F2791


Implant groups

Hip implants Knee implants Spinal implants Shoulder implants Finger implants Osteosynthesis Instruments Ankle implants Vascular implants Material testing Dental implants Particle analysis Elbow implants Wrist implants Exoprosthesis Consumables
© cosmosdesigned