EndoLab - Implant Testing Services Implant Testing

Knieimplantate
alle Verfahren akkreditiert

Steifigkeit Knieimplantat - ASTM F1223Steifigkeit Knieimplantat - ASTM F1223 Luxationstest Mobile Bearing - ASTM F2724Luxationstest Mobile Bearing - ASTM F2724 Flächenpressung Kniegelenkimplantat - PI-17Flächenpressung Kniegelenkimplantat - PI-17 FEA Tibiakomponente - ASTM F3334FEA Tibiakomponente - ASTM F3334 Dauerschwingversuch Tibiaplateau - ISO 14879-1/ ASTM F1800Dauerschwingversuch Tibiaplateau - ISO 14879-1/ ASTM F1800 Patella Spezifikation - ASTM F1672Patella Spezifikation - ASTM F1672 Oberflächenanalyse von Kniegelenkimplantaten - ISO 7207-2Oberflächenanalyse von Kniegelenkimplantaten - ISO 7207-2 Verschleißversuch - ISO 14243-1/3Verschleißversuch - ISO 14243-1/3 Dauerschwingprüfung unter Flexion - ASTM F2777Dauerschwingprüfung unter Flexion - ASTM F2777 Dauerschwingprüfung der Tibiaplateau/Tibiainsert Verbindung - ASTM F2723Dauerschwingprüfung der Tibiaplateau/Tibiainsert Verbindung - ASTM F2723 Dauerschwingprüfung der Tibiaplateau/Tibiainsert-Verbindung unter Torsion - ...Dauerschwingprüfung der Tibiaplateau/Tibiainsert-Verbindung unter Torsion - ASTM F2722 Knieimplantat, Aktivitäten des täglichen Lebens - ASTM F3141Knieimplantat, Aktivitäten des täglichen Lebens - ASTM F3141 FEA Knie Femurkomponente - ASTM F3161FEA Knie Femurkomponente - ASTM F3161 Dauerschwingversuch an unikondylären Tibiaplateaus - ASTM F3140Dauerschwingversuch an unikondylären Tibiaplateaus - ASTM F3140 Dauerschwingversuch Kniekondyle - ASTM F3210/ PI-73Dauerschwingversuch Kniekondyle - ASTM F3210/ PI-73 Haltbarkeitsprüfung Patella - ISO 14243-5Haltbarkeitsprüfung Patella - ISO 14243-5 Dauerschwingprüfung an Femurkomponenten mit Schaft - PI-53Dauerschwingprüfung an Femurkomponenten mit Schaft - PI-53 Anforderungen an Implantate für den Kniegelenkersatz - ISO 21536Anforderungen an Implantate für den Kniegelenkersatz - ISO 21536 Mechanische Tests an Modularen Knieimplantaten - ASTM F1814Mechanische Tests an Modularen Knieimplantaten - ASTM F1814 Spezielle Anforderungen an Gelenkimplantate - ISO 21534Spezielle Anforderungen an Gelenkimplantate - ISO 21534 Knie Spezifikation - ASTM F2083Knie Spezifikation - ASTM F2083

Flächenpressung Kniegelenkimplantat - PI-17

Aktuelle Prüfverfahren  



PI-17: Determination of Total Knee Implant Contact Pressure

ASTM F2083: Standard Specification for Knee Replacement Prosthesis

ASTM F1672: Standard Specification for Resurfacing Patellar Prosthesis

Pressure distribution and pressure levels influence the wear of total knee replacements. Using pressure films, the contact area, as well as the amount of pressure (in MPa), can be determined. We have developed a computerized calibration method to achieve reproducible results while avoiding the disadvantages of pressure films. An individual calibration is performed for every test series. Digital image processing is used to analyse the results.
This test evaluates the pressure distribution and total contact area between the femoral component and tibial insert or between the femoral component and the patella insert of a total knee replacement system under different flexion angles and loads. These results help to develop optimized geometries.  


Implant Testing - Flächenpressung Kniegelenkimplantat - PI-17 Knee Contact Pressure Test - PI-17